Aqua Integration Guide

Aqua provides full dev-to-prod security across your entire CI/CD pipeline and runtime environment, giving you end-to-end visibility and protecting your applications against attacks. By integrating PagerDuty into Aqua CSP, Aqua notifications can be sent directly to PagerDuty.

In PagerDuty

  1. From the Services menu, select Service Directory.
  2. On your Service Directory page:
    If you are creating a new service for your integration, click + New Service. If you are adding your integration to an existing service, click the name of the service you want to add the integration to. Then click the Integrations tab and click the Add a new integration link.
  3. Select your app from the Integration Type menu and enter an Integration Name. If you are creating a new service for your integration, in General Settings, enter a Name for your new service. Then, in Incident Settings, specify the Escalation Policy, Notification Urgency, and Incident Behavior for your new service.
  4. Click the Add Service or Add Integration button to save your new integration. You will be redirected to the Integrations page for your service.
  5. Copy the Integration Key for the integration and keep it in a safe place for later use.

In Aqua

    1. In the Aqua Console, navigate to System / Integrations / Notification Feed. If the button near the PagerDuty text string says OFF, click on the PagerDuty text to turn it on:
    2. In the Integration screen that shows Modify Notifier: PagerDuty, do the following:
      • Ensure that the Enabled check-box is checked.
      • Fill in the Service Key field. This is the Integration Key that was created in PagerDuty.
      • Fill in the Sender Name field. This will appear on the notification originated from Aqua.
    1. Click the Send Test Messages.
    2. Click Save Changes.


Start Using PagerDuty Today

Try PagerDuty free for 14 days — no credit card required.